Fastcorp, LLC
DIVI Setup and Users Guide
Page
36
of
62
Rev 6
V.
MDB SETTINGS
Allows user to specify settings for currency system.
Force Vend - Customer cannot use the vendor for the purpose of changing bills. If a bill is inserted and
the coin return button is pressed, it is ignored. A selection must be chosen. The only exception is when
the selection is sold out.
No Cheat - Bills are not accepted if there is not adequate change for a refund in the event of a failed
vend.
Change Bill - Similar to forced vend but focuses only on bills that have been accepted, whereas force
vend is also concerned with coins.
Hold Lost Credit - Funds that could not be returned to a customer during a vend are available for
another transaction.
Multi Vend - Change is not automatically returned after a transaction, but held for another transaction
or until coin return is pressed.
Lev 2 Coin Mech -
When set to “N” (default), the coin mechanism will determine optimum change. If
set to “Y”, the VMC will determine what coins to give back as change, regardless of the capabilities of
the coin mechanism. Power to the VMC must be cycled off and back on after changing this setting.
Instant Reval -
When set to “Y” (default), a stored value cashless device can receive revaluation credit
as soon as coin or cash is inserted into the vendor. When option is
set to “N”, revaluation occurs when
a major action is taken such as pressing the coin return. This option is only necessary for older cashless
systems where the number of revaluations per credit device is limited.
Display
Programming Instructions
23) MDB Settings
a) Press the #=Yes key to enter Menu Option.
* = Next
D = Back
# = Yes
Force Vend
N
b) Press *=Change to change setting and # to accept
choice.
*=Change
#=Accept
No Cheat
Y
c) Press *=Change to change setting and # to accept
choice.
*=Change
#=Accept
Change Bill
N
d) Press *=Change to change setting and # to accept
choice.
*=Change
#=Accept
Hld Lost Crdt
Y
e) Press *=Change to change setting and # to accept
choice.
*=Change
#=Accept
Multi-Vend
N
f) Press *=Change to change setting and # to accept
choice.
*=Change
#=Accept
Lev2 Coin Mech
N
g) Press *=Change to change setting and # to accept
choice.
*=Change
#=Accept
Instant Reval
Y
h) Press *=Change to change setting and # to accept
choice.
*=Change
#=Accept
Содержание DIVI
Страница 56: ...Fastcorp LLC DIVI Setup and Users Guide Page 56 of 62 Rev 6 Display Assembly Freezer Lid Closed Switch...
Страница 61: ...Fastcorp LLC DIVI Setup and Users Guide Page 61 of 62 Rev 6...
Страница 62: ...Fastcorp LLC DIVI Setup and Users Guide Page 62 of 62 Rev 6 VMC Connector layout...