Fastcorp, LLC
DIVI Setup and Users Guide
Page
25
of
62
Rev 6
UP/DOWN TRAVEL LIMITS
: This feature allows the customer to adjust how deep the Picker Tip will descend
into both tall and short bins. NOTE: Increasing the number will cause the vacuum pump to travel further into
the bin. Changing this value by 5 represents a change in travel of 1“.
VERIFY ALL BINS
: Automatically moves robot over each bin position. Allows user to verify and edit bin
programming.
MDB SETTINGS
: Allows specific settings for currency system:
Force Vend
- Customer cannot use vendor for the purpose of changing bills. If a bill is inserted and the coin
return button is pressed, it is ignored. A selection must be chosen. Only exception is when the selection is sold
out. No Cheat - Money is not accepted if there is a possibility where the customer will be short-changed. Bills
are not accepted if there is not adequate change for a failed vend.
Change Bill
- Similar to forced vend but focuses only on bills that have been accepted, whereas force vend is
also
concerned with coins.
Hold Lost Credit
- Funds that could not be returned to a
customer during a vending are available for
another transaction.
Multi Vend
- Change is not automatically returned after a transaction, but held for another transaction. Press
the coin
return button to receive your change.
Lev 2 Coin Mech
-
When set to “N” (default), the coin mechanism will determine optimum change. If set to
“Y”, the
VMC will determine what coins to give back as change, regardless of the capabilities of the coin
mechanism. Power to the VMC must be cycled off and back on after changing this setting.
Instant Reval
-
When set to “Y” (default), a stored value
cashless device can receive revaluation credit as
soon as coin or cash is inserted into the vendor. When option is set to “N”, revaluation occurs when a major
action is taken such as pressing the coin return. This option is only necessary for older cashless systems where
the number of revaluations per credit
device is limited.
SOFT DROP
: Allows enabling and setting the “Soft-Drop” feature that lowers the product before it releases it
into the product chute. Delay time is how long the picker tip waits at delivery position to allow vacuum to
dissipate and product to release from picker tip.
Содержание DIVI
Страница 56: ...Fastcorp LLC DIVI Setup and Users Guide Page 56 of 62 Rev 6 Display Assembly Freezer Lid Closed Switch...
Страница 61: ...Fastcorp LLC DIVI Setup and Users Guide Page 61 of 62 Rev 6...
Страница 62: ...Fastcorp LLC DIVI Setup and Users Guide Page 62 of 62 Rev 6 VMC Connector layout...
