3.
15
(MT13 - En 2015)
3
Modifying a code
To change the previously saved code you must
enter the programming mode and then:
select the programming code 00;
press the button
until the code you want to
modify is displayed;
press to go to the code you want to modify;
enter the new code on the keyboard and then
press the button
;
repeat the operation for all the codes you want
to modify;
press the button PROG to exit the program-
ming mode.
Deleting a code
To delete the previously saved code you must
enter the programming mode and then:
select the programming code 00;
press the button
until the code you want to
delete is displayed;
press the button and then
;
repeat the operation for all the codes you want
to modify;
press the button PROG to exit the program-
ming mode.
Entry / modification / deletion of names
(code 01)
The digital keyboard TD2100PL has an
alphanumerical display with 32 characters that
displays the user name and extension number
(28 characters are used for user name and the
last 4 characters on bottom right are used for
extension number). To save them, you must
follow the procedure illustrated below. The name
must be entered starting from the first character
on top left and the last digit of the extension
number must be entered in the last position on
bottom right, otherwise the number will not be
saved (see “deletion of names”).
After you have entered all the names, the system
will automatically arrange them in alphabetical
order.
Example
YES
NO
Function of buttons when entering or
modifying a name
Hold this button pressed to scroll the list of
existing names
Hold this button pressed to move the cursor
to the name characters
Hold this button pressed to scroll down the
list of characters
Hold this button pressed to scroll up the list
of characters
When searching for characters, the display
shows uppercase letters, low-case letters,
numbers, special characters and space in a
sequence.
DOOR STATIONS
Entry of names
Press the button PROG to enter the pro-
gramming mode.
Enter the code 01 and press the button
;
the display shows the first name. The display
is empty if no codes are programmed.
Press or to select the character for the
first cell; press to go to the second cell;
press or to select the character for the
second cell; continue until you have entered
the complete name with code. Press after
you have entered the number in the last cell
on bottom right; the display shows “STORE
USER / YES
NO”; press to confirm;
press to modify the name.
If confirmed, the display shows the second
name. The display is empty if no names are
programmed.
Press the button PROG again to confirm the
last name to insert. The display shows “wait-
ing” and an automatic status bar. Normal
operation is restored after a few seconds
and the display shows the initial text (see
“Operation” on page 3.17).
Notes. Once you have entered 250 names the
display shows “waiting” and an automatic status
bar. After a few seconds the display shows
“Programming / type: “ and you can continue
with programming or press the button PROG
to exit.
You can enter 2 or more names with the same
call number (i.e. different family names in the
same apartment).
Modification or correction of names
Press the button PROG to enter the pro-
gramming mode.
Enter the code 01 and press the button
;
the display shows the first name.
Press
to search for the name you want to
modify (hold the button pressed for quick
searching).
Press to go to the character you want to
modify.
Select the character with (forward)
(backward).
Repeat the operation until you have
completed the name modification.
Once you have completed the modification,
hold
pressed until the display shows
“STORE USER / YES
NO”. Press to
confirm or to modify the name again.
Enter a space to delete a letter.
Addition of 1 or more names to the list
To add a new name to the existing list you must:
press the button PROG to enter the pro-
gramming mode;
enter the code 01 and press the button
;
the display shows the first name;
press
to scroll the list (hold the button
pressed for quick searching); the display is
empty after the last name;
to enter a new name follow the operations
described in “Entry of names”. If confirmed,
the name is placed in the list in alphabetical
order.
Deletion of names
Press the button PROG to enter the pro-
gramming mode.
Enter the code 01 and press the button
;
the display shows the first name.
Press
to search for the name you want to
delete (hold the button pressed for quick
searching).
Press to go to the last cell (bottom right);
enter a space to delete the existing number.
Press again; the display shows “DELETE
USER / YES
NO” Press to confirm or
to go back to the name.
The next name is displayed after you have
deleted the name.
Language selection (code 02)
You can choose the language from 8 different
options (Italian, English, French, German,
Spanish, Portuguese, Turkish and Polish) in
operation mode.
To select the language:
press the button PROG to enter the pro-
gramming mode;
enter the code 02 and press the button
;
the display shows “Italiano” in case of first
programming or the programmed language;
press or to select the language.
press
to confirm; the display shows
“Programming / type: “;
continue by entering the code of a new pro-
gramming function or press the button PROG
to exit.
System programming (code 03)
You can change or activate the functions of the
push-button panel (see table 3.4).
For programming you must:
press the button PROG to enter the pro-
gramming mode;
enter the code 03 and press the button
;
the display shows “bit 0 = 0 / 0
1” in case
of first programming or “bit 0 = 1 / 0
1” if
changed in the previous programming;
press to select 0 or to select 1;
press
to confirm and go to the next code
(see code table with descriptions);
once you have confirmed the value of the last
code (bit 7), the display shows
“Programming / type: “;
continue by entering the code of a new pro-
gramming function or press the button PROG
to exit.
Personalisation of display initial text (code
04)
You can modify the text shown on the display
during normal operation or idle state. For
visualization you must set bit 4 or bit 5 with
value “1” (see “system programming”).
To insert a personalized text:
press the button PROG to enter the pro-
gramming mode;
enter the code 04 and press the button
;
the display shows “DUO System“, in case of
first programming, or the text you want to
replace;
for information on how to enter the characters
see “entry of names”;
DIGITAL PUSH-BUTTON PANEL
