Farfisa EH9262CW series, Техническое руководство

Страница: 202 / 208

5.
50
(MT13 - En 2015)
I
N
T
E
R
C
O
M
S
Si 54CM/14
MULTI-WAY INTERCOM SYSTEM CONNECTED TO 1 OR MORE DOOR STATIONS
Programming
After all the connections have been made and the system
powered up, proceed to programming the apparatus listed
below in the order shown.
Door stations:
- Door station address
- First button address (encoder and additional button mod-
ules)
- Enter the user names (digital keyboard)
Internal stations:
- User address (see chapter 2)
- Activation of buttons to enable the entrances from inter-
coms (optional)
Possible extensions of the system
- Intercoms in parallel in individual apartments
- Application of actuators for various services (see page
5.20)
- Application of one or more keeper exchangers (see page
5.21)
Operation mode.
By making a call from the door external station you can
activate the call of the desired intercom. When you lift the
handset, the internal station starts the conversation and can
activate the door lock by pressing the key
.
For more detailed information on operation see the descrip-
tion of the different products (chapters 2 and 3).
Busy signal on the external door stations.
A busy signal indicates that there is a call or conversation
going on from the other external door station.
Intercoms
... EX352
(1)
Exhito intercom with 3 buttons
... EX362 (1) Exhito intercom with 8 buttons
Door stations with digital keyboard (PE)
- series PROFILO
... AD2120CPL
Module with integrated door speaker
... TD2100PL
(1)
Digital push-button panel
... PL72 Back box with module frames
... PL82 Hood cover
... PL92
(2)
Rain shelter with module frames
- series MATRIX
... AD2110MAS
Module with integrated door speaker
... TD2100MAS
(1)
Digital push-button panel
... MA72 Back box with module frames
... MAS62 Front frame
... MA92
(2)
Rain shelter with module frames
CONVENTIONAL door stations with digital encoder (PE)
- series AGORA'
... AD2121CAG-AD2121CAGL
(1) Intercom door station
... AG100TS - AGL100TS
(1)
Push-button door station
... AG21 - AGL21 Single button module
... AG20 - AGL20 Blank module
- series PROFILO
... AD2120CPL
Module with integrated door speaker
... CD2131PL÷CD2138PL (1) Digital encoder modules
... PL24S - PL228S (1) Button modules
... PL20 - PL50 Blank and number modules
... PL72 - PL73 Back boxes with module frames
... PL82 ÷ PL89 Hood covers
... PL92 ÷ PL99 (2) Rain shelters with module frames
- series MATRIX
... AD2110MAS
Module with integrated door speaker
... CD2131MAS÷CD2134MAS
(1)
Digital encoder modules
... MAS24S (1) Button module
... MAS20 Blank module
... MA72 - MA73 Back boxes with module frames
... MAS62 - MAS63 Front frames
... MA92 - MA93
(2)
Rain shelters with module frames
Other articles
... 2220S Transformer
1 2221ML - 2221S Line power supply
1 DV2420 Line distributor
... FP (3) Floor push-button (optional)
... PA
(3)
Door release button (optional)
... SE (3) Electric door lock (12Vac-1A)
... According to the number of users (max. 100 intercoms) and door stations.
(1)
Articles to be programmed.
(2)
Rain shelters are used in replacement of back boxes and hood covers.
(3)
Articles not supplied by ACI Farfisa.
Installation notes
- If you use more than 4 push-button modules (door station), you must power the name-plate
LEDs of the additional modules with an 12Vac supplementary transformer (see page 5.15).
- In this diagram you can install 100 intercoms with a maximum system distance of 1000
metres.
- For the connection, see page 5.14. For the cross section of the wires, see the table on the
side or the table 5.3 of page 5.8.
- We recommend to install all articles framed with a broken line in the same switchboard.
With 1mm² wires this intercom installation can reach the
maximum distance of 1 000 metres.
Maximum distance of the sections A and C (see
diagram)
Section Cable type
1mm² (art.2302)
0.2mm² (AWG24)
A 50 metres 5 metres
C 1000 metres 100 metres