3.
35
(MT13 - En 2015)
3
Table 3.9
Programming codes
00 Entry of codes for door lock / address P1
/ address PE
01 Entry-modification-deletion of names
02 Language selection
03 System programming
04 Entry of display initial text
05 Loading names from PC
06 Ordering names
10 Address associated with EC-EM termi-
nals
20 Settings for operations with a doorkeeper
exchanger
DOOR STATIONS
DIGITAL PUSH-BUTTON PANEL
LP
LP
P1
EM
S2
S1
P1
EC
TD2100MAS
. Matrix series anti-vandalism
steel push-button panel with 14 steel buttons
and alphanumerical LCD. Used to dial and
send calls over DUO digital line.
Technical features
Power supply from audio/video module
Door-opening time
3/6 seconds
LCD
2 lines x 16 characters
Number of calls
200
Memory
250 names
Dimensions
1 module
Operating temperature
0°÷+40°C
Maximum humidity acceptable
90% RH
Terminals
LP/LP audio-data-video to and from internal us-
ers
P1/P1 direct call button inputs
EC
positive signal for auxiliary service
EM
negative signal for auxiliary service
S1/S2 door opening contacts
Positions of jumper J1
2-3 = operation mode
1-2 = programming mode
PROGRAMMING
(instruction for article with software AE040 or
higher)
Before programming you must:
Move the jumper J1 on the back of the push-
button panel from 2-3 to 1-2; the display
shows “Programming / type: “.
J1, J2, J3
jumpers for pro-
gramming
to the DUO
digital line
jack for the connec-
tion to the PC
cable for the connection to
the audio/video module
DIGITAL PUSH-BUTTON PANEL
Connection terminal boards
Dial the programming code (see table 3.9)
and press
to confirm.
After you program each single code, bring
the jumper J1 back to 2-3.
Entry of codes for door lock / address P1
/ address PE (code 00)
Enter the code 00 to access the “entry of door
lock codes” mode. The display shows
“PASSWORD 0 / ”.
Dial the first opening code on the keypad, for
example 7890; the display shows
“PASSWORD 0 / 7890”.
Press
; the display shows “PASSWORD
1 / ”.
Dial the second opening code on the keypad,
for example 1234; the display shows
“PASSWORD 1 / 1234”.
Press
; the display shows “PASSWORD
2 / ”.
Repeat the operation to enter a maximum of
16 codes. When you press
to confirm the
last code (PASSWORD 15) you enter the
“entry of address P1 code” mode
automatically. You can memorise the number
of the internal station that can be called directly
by pushing a button connected between
terminals P1 /P1.
Press
; the display shows “P1 / 0100”.
Press to delete the code shown on the
display and enter the number of the internal
station you want to enable for the direct call
function. The internal stations can be coded
with numbers from 1 to 200.
Press
to confirm and go to the “entry of
address PE code”; the display shows “PE
/ 0231 ”. You can enter the code for the
external station address. The push-button
panels can be coded with numbers from 231
to 250.
Dial the code and press
to confirm. You
go back to the “entry of door lock codes”
mode. The display shows the PASSWORD
0 code (PASSWORD 0 / internal station)”.
To exit programming bring the jumper J1
back to the original position (from 1-2 to 2-3).
Modifying a code or address
To change a code or address, you must enter
the programming mode by moving the jumper
J1 from 2-3 to 1-2 and then:
select the programming code 00;
press the button
until the code you want to
modify is displayed;
press to go to the code you want to modify.
enter the new code on the keyboard and then
press the button
repeat the operation for all the codes you
want to modify;
move the jumper J1 from 1-2 to 2-3 to exit the
programming mode.
Deleting a code or address
To delete a code or address, you must enter the
programming mode by moving the jumper J1
from 2-3 to 1-2 and then:
select the programming code 00;
press the button
until the code you want to
delete is displayed;
press and then
;
repeat the operation for all the codes you
want to delete;
move the jumper J1 from 1-2 to 2-3 to exit the
programming mode.
Entry / modification / deletion of names
(code 01)
The digital keyboard TD2100MAS has an
alphanumerical display with 32 characters that
displays the user name and extension number
(28 characters are used for the user name and
the last 4 characters on bottom right are used
for the extension number). To save them, you
must follow the procedure illustrated below.
The name must be entered starting from the
first character on top left and the last digit of the
extension number must be entered in the last
position on bottom right, otherwise the number
will not be saved (see “procedure to delete a
name”).
After you have entered all the names, the system
will automatically order them alphabetically.
Example
YES
NO
to the electric
lock and auxiliary
services
