FAR EB 400, Перевод оригинальной инструкции

Страница: 11 / 16

MAIN COMPONENTS
A) ................................................................................ Nozzle
B) .........................................................................Nozzlehead
C) ...............................................................................Display
D) ................................................................................ Button
E) ............................................................................... Battery
WARNING!
The work area must always be kept neat
and well-lit.
In particular, flammable liquids or gases must
not be present.
RIVETING TOOL IDENTIFICATION
The EB 400 is identified from a marking that shows company
name and address of manufacturer, designation of the tool, CE.
Always refer to the information on the riveting tool when
requesting technical service.
TECHNICAL SPECIFICATIONS
• Supply voltage .................................................. 14.4 V-3 Ah
• Weight .................................................................. 2,300 Kg
• Operating temperature ........................................... -5°/+50°
• Root weighted mean square of overall
acceleration frequency (Ac)
to which arms are subjected ...............................
< 2.5 m/s
2
• A-weighted emission sound pressure level ............ 63 dBA
• Peak C-weighted instantaneous sound pressure
<130 dBC
• A-weighted sound power ........................................ 75 dBA
ELECTRICAL CONNECTION
The EB 400 riveting tool is powered by a rechargeable Li-Ion
battery 14.4 Volt - 3 Ah that is included in the packaging.
Use only the battery charger supplied by
FAR to recharge
this battery.
For information about the battery charger, see the instruction
booklet supplied with it.
Before plugging the battery charger into the power socket, make
sure that the line voltage corresponds to the value indicated on
the battery charger label.
Make sure the main electrical system is properly sized to support
the rated charge (see technical specifications).
Make sure the electrical system complies with current
regulations.
The power cord has a plug that must be inserted into a
matching socket.
17
GB
EB 400
Revision - 02 Date 05-2017
GRANAROLO EMILIA - BOLOGNA - ITALY
VIA GIOVANNI XXIII2 - QUARTO INFERIORE
Name of manufacturer
Designation of the tool
Serial number
Company name
and address
E
270 mm
Ø 23
70 mm
340 mm
50 mm
A
B
C
D