33
6.1.2 Firmware update procedure ClubSport USB Adapter
To initiate the firmware update the ClubSport
USB Adapter must be connected to the PC
first. Then go to page ‘Update’ (see chapter
‘PC driver with CSL Elite Pedals’ of this manual) and press button ‘Update USB
Adapter Firmware’ as shown on the right hand side:
Then the Firmware Updater starts, see picture below:
Right at start of the Firmware Updater the latest firmware file per driver default
is selected and set. The user only has to select the ‘CSL Elite Pedals’ as the
correct device.
Then press button ‘Start Update’ and the up-
date process finishes:
Then disconnect the ClubSport USB Adapter
and reconnect it again, the CSL Elite Pedals
can be used now on PC USB port.