![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-pedals/csl-elite-pedals_manual_3343343034.webp)
34
6.2.2 Firmware update procedure CSL Elite Pedals LC
To initiate the firmware update the CSL Elite Pedals LC must be connected to
the PC by USB first. Then go to page ‘Update’ (see chapter ‘PC driver with CSL
Elite Pedals LC’ of this manual) and press but-
ton ‘Update CSL Pedals Firmware’ as shown
on the right hand side:
Then the Firmware Updater starts, see picture below:
Right at start of the Firmware Updater the instructions ‘Set Pedals into boot-
loader mode’ is executed, the latest firmware file per driver default is selected
(see line ‘Firmware File’ on top side of the Firmware Updater window) and set
– both indicator checkboxes are marked active.
Now the user has the opportunity to select a different CSL Elite Pedals LC firm
-
ware file than the default selected file by pressing the button with the three dots
if necessary. Usually the latest PC driver version already includes the latest
CSL Elite Pedals LC firmware so this step is
not necessary for the user.
By pressing the button ‘Start’ the firmware up
-
date proceeds within a few seconds and the
Firmware Updater indicates progress until the CSL Elite Pedals LC firmware
update has been finished completely, see picture below: