18
Adjust the brake stiffness by arranging the different elastomer springs on the back side
brake rod according to your setup and favour.
The brake rod takes five pieces of elastomer springs plus the required soft yellow
spring.
Please refer to table of this Manual for correct setup!
Hardness
Description
Max. load Scenario / setup recommendation
Shore
65
Medium
hardness
18 kg
Pedals on grippy floor or mounted to wheel
stand
Shore
85
Hard
40 kg
Pedals mounted to wheel stand or to rig /
cockpit
Shore
95
Very hard
90 kg
Pedals mounted to rig / cockpit
IMPORTANT:
The elastomer springs must not be compressed more
than 40% of their length so do not put more load on them than listed in
table! If mixing brake springs with different hardness on the brake rod the
maximum load is defined by the spring with lowest shore value!
Replace the brake limiter pad at the backside of the clutch pedal unit (former
CSL Elite Pedals brake) by clutch limiter pad from CSL Elite Pedals Loadcell
Kit package content.