![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-pedals/csl-elite-pedals_manual_3343343031.webp)
31
Beside the indicator bar for the brake pedal there is another setting
bar with an arrow, scaled into eleven stages (‘100’ on top end, ‘OFF’
on bottom end, indicated in the square above the brake axis indica-
tor), see picture on right hand side:
This bar is only displayed and active when the Pedals are connect-
ed to PC by USB directly. By moving the arrow from stage ‘OFF’
to stage ‘100’ the signal resistances of the brake pedal can be ad-
justed: Increasing to 100 means the user needs to press the brake
with maximum force to achieve 100% brake signal. Reducing to OFF
means the user needs to press the brake only with a small force to
achieve 100% brake signal.
NOTE:
When the CSL Elite Pedals LC are connected to a wheel base
this adjustment can be done in the wheel base tuning menu with param-
eter BRF which has exactly the same functionality. Please read the user
manual of your wheel base for more details.
On the upper side of the PC driver you can switch from window ‘Function Test’
to window ‘Update’, see picture below:
This page gives you detailed informations about the currently installed PC driv-
er version and the currently installed CSL Elite Pedals LC firmware version.