Falcon FS 108Z vario, Руководство оператора

Страница: 47 / 51

Rev. Apr2 2020 ©
FALCON
Inspection and Maintenance
Operators manual
47
10.6 Spare parts modifi cation
Spare parts are listed in separate spare parts
catalogue.
Do not repair with unauthorised components.
Do not make any modifi cations without prior
written approval.
10.7 Tightening of the crawler belts
Platforms with 1 set of belts
Tighten the crawler belts once a week
with lubrication grease
(Type Texaco Multifak EP-2).
Check the adjustment by the nut for
the tension roller.
1. Dismount the cover over the grease
nipple. (1 nipple on each side of the
platform).
Fig. 66 The nut for the tension roller is placed here
2. Tighten the tension roller by a grease gun
Fig. 67 Grease gun on grease nipple for the tension roller
Fig. 68 Nut – Crawler belts NOT tightened
3. When the crawler belts are tightened
correctly, there must be a distance between
nut and the rear plate of app. 0,5-1mm.
Fig. 69 Nut – Crawler belts tightened
4. It can be diffi cult to see the nut.
Use a mirror.
Fig. 70 Placement of mirror