Falcon FS 108Z vario, Руководство оператора

Страница: 24 / 51

FALCON
935-33400011 Operators instructions
Operators Manual
24
Z-link is controlled with the right handle
The main boom is controlled with the lever 2
from right.
One of the two middle lever controls the
jib arm.
Telescope is controlled with handle No. 2 from
left
Slewing is controlled by the left handle
Before slewing is possible, the Z-link is raised until
display 8% and LED 2% indicator is not fl ashing
any more.
Lift Function
Function selector switch to the left Position
and the following image appears on the display:
driving
Before you can drive, all four outriggers must be
raised from the ground.
Function switch # 9 placed in the middle
position.
The two belts are controlled independently of
each other with the left and right handle.
Watch for this symbol.
When having the same position relative to the
basket, as the symbol shows, the lift drive away
from you when lever is moved forwards.
If your position is reversed to the
symbol, the lift will drive away from you when
you Pull the lever back.
The lever number two from left the left crawler
can be raised or lowered. With lever number
two from right the right crawler can be raised or
lowered.
The raising or lowering of the belts will
automatically stop if the sidewards inclinataion
becomes higher than allowed. The only
functions that leads to the chassis will come
more in level is then possible.
The symbols showed on the picture also shows
jib functions with the two middle handles.
With switch # 6 choose whether it should be
fast speed with low pulling force, or slow
speed with high pulling force.