Falcon FS 108Z vario, Руководство оператора

Страница: 27 / 51

Rev. Apr2 2020 ©
FALCON
Operators Instructions
Operators Manual
27
Place the legs as close to horizontal as
possible.
When all four outriggers are placed and
secured to the sandwich with the locking bolt
they can be lowered with the outrigger control
levers, located under the chassis control panel
or remote control.
CAUTION
When lowering the outriggers make sure
that there is no interference with the
pumps and diesel engine. Do not lower
the outriggers when they are locked in
the stowed position. This is not a working
position and can cause interference with
chassis resulting in structural damage.
WARNING
When lowering the outriggers, do not lift
the platform more than 2 feet from the
ground.
The platform does not stop automatically.
Failing to do so can cause injury or death.
WARNING
If the outrigger base of the outrigger is not
locked to the chassis frame the outriggers
can turn, resulting in instability which can
cause injury or death.
Locking bolt for securing the outrigger
base to the chassis frame must always
be in position before attempting to lift the
platform off the ground.
5.2.01 Setting up the outriggers
from Chassis control panel
Overview operations locations
Outrigger control handles
Description:
1 Outrigger control-handle for outrigger 1 up/
down
2 Outrigger control-handle for outrigger 2 up/
down
3 Outrigger control-handle for outrigger 3 up/
down
4 Outrigger control-handle for outrigger 4 up/
down
5 Spirit level
6 Push button for START PUMP
7 Battery capacity indicator
8 Emergency stop button
9 Control slector key switch
The valves for Tracks Forward/backward are
placed on back end chassis.