Falcon FS 108Z vario, Руководство оператора

Страница: 28 / 51

FALCON
935-33400011 Operators instructions
Operators Manual
28
5.2.02 Setting up the outriggers
from the remote control
The function selector # 9 placed in the right
position and the following picture is displayed.
When the lift is not equipped with IDRC:
First handle from left, outriggers 1
Pull back and outriggers are lowered.
push away and outriggers raised up.
Second handle from left, outriggers 2
Pull back and outriggers are lowered.
push away and outriggers raised up.
The second lever from the right, outriggers 3
Pull back and outriggers are lowered.
push away and outriggers raised up.
The fi rst lever from the right, outriggers 4
Pull back and outriggers are lowered.
push away and outriggers raised up.
If equipped with ”Auto Set-up” the outriggers
can automatically be set up at the same time
by pulling back the two middle handle - at a
constant tone - the lift is fi nished with
”Auto Set-up”
Check the Libelle / spirit level Fig.19 - 5
If you are in the same position as the symbol
compared to the lift, the left handle will control
the nearest outriggers on your left.
Handle 2nd from left will control the farthest
outriggers on your left.
Handle 2nd from the right will control the farthest
outriggers on your right.
Handle # 1 from the right will control the nearest
outriggers on your right.
with IDRC
Watch for this symbol:
Warning
Always use the maximum possible axle
width that space allows.