Falcon FS 108Z vario, Руководство оператора

Страница: 8 / 51

FALCON
935-33400011 Introduction
Operators Manual
8
1.1.04 Turn main switch on
Turn on the main switch situated next to the
turn switch for the emergency pump at the right
side of the platform. Turn the key switch to
„control from chassis“
Check battery capacity indicator (round
instrument) at the Chassis control panel at the
front of the platform.
WARNING
Do not attempt to open any boxes
containing electrical components, when
mains are connected to the machine.
Contact with the main supply can cause
injury or death.
Before opening the boxes with electrical
components, mains must be disconnected
from the machine. Repair work with
24V DC power connected may only be
performed by authorized personnel.
1.1.05 Remove wooden blocks
The wooden blocks supporting the chassis
shall be removed by the means of ordinary
hand tools.
Please make sure that the upper control box
does not interfere with the container roof.
1.1 Introduction
1.1.01 Handling by crane
If the platform is received on truck and has to
be handled with crane the platform can be lifted
off the truck by a crane. The outriggers shall be
placed in narrow position (
orange )
(not transport position) and the crane must be
attached to the fi xing points at the outriggers.
Length of lifting chains on crane must be
adjusted to give balance of the platform as
centre of gravity is not located in the middle of
the outriggers attach points.
See fi g 1
Fig. 1
1.1.02 Transportation in containers
The following precautions must be observed/
noticed when receiving these machines, in the
order described below. Please note that the
description below is only in a short form, and
that the appropriate sections of this document
have to be read and followed thoroughly.
1.1.03 Remove ropes
The platform is strapped to the container with
ropes etc. These ropes can be used for later
strapping of the machine on a truck fl atbed,
etc.