FALCOM MAMBOII, Руководство пользователя

Страница: 67 / 271

C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
- V
ERSION
1.0.0
Each dynamic entry is separated by ampersand “&” without spaces and it is
enclosed in parentheses “( )“.
The command for requesting such system states might look like this:
For example:
$PFAL,Display.Dialog=10,”Speed Message”,4,10,”Left”,”Right”,”on: & ( Date) at & ( Time ) it
is moving at & ( Speed) m/s "
Dynamic entries are listed in chapter 6.2 page 243.
3.2.1.15.3 Display.Alarm – Displays a specific alarm image on the screen
Command syntax $PFAL,Display.Alarm=< image >,< timeout >,< ”text” >
Examples
$PFAL
,Display.Alarm=WARNING,20,”
Battery low
”
$PFAL
,Display.Alarm=CALL,20,”Incoming call”
$PFAL,Display.Alarm=NEWSMS,20,”New SMS”
……
……
Responses E.g. $SUCCESS
Command description
This command enables you to display a specific alarm icon on the screen letting
the user know that something has happened (e.g., a specific event occurs,
receiving call, leaving/entering a geofence area etc.).
Parameter description
<image>
Specifies the image to be displayed on the screen. It can be set to:
Value Meaning
WARNING
Displays a warning image (e.g. when the battery
becomes low)
CALL
Displays a call image (e.g. when receiving a GSM call).
NEWSMS
Displays an SMS image (e.g. when receiving an SMS).
MAIL
Displays a mail image (e.g. when receiving a mail).
KEYFOB
Displays a keyfob image (e.g. when a keyfob results
connected)
GEOFENCE
Displays a geofence image (e.g. when leaving/entering a
Geofence or Area).
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 67 of 271