FALCOM MAMBOII, Руководство пользователя

Страница: 101 / 271

C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
- V
ERSION
1.0.0
3.2.5 “GSM” command type
3.2.5.1 “GSM” general command indices
3.2.5.1.1 GSM.PIN=< ”pin” > - Enters the PIN number of the used SIM card
Command syntax $PFAL,GSM.PIN=<” pin” >
Examples
$PFAL,GSM.PIN=”1111”
Responses
Command description
This command enters the PIN code of the used SIM card. See also the description in
chapter
3.2.20.1 , page 176 for more details.
Parameter Description
<”pin”>
It specifies the PIN number of the used SIM card, wrapped in quotation marks.
This may be for example the SIM PIN to register onto the GSM network, or the SIM
PIN to replace the current PIN number with a new one.
4
to
8
digits are
available.
3.2.5.1.2 GSM.PUK=<” puk ”>,<” pin ”> - Enters the PUK and PIN numbers of the
used SIM card
Command syntax $PFAL,GSM.PUK=< ”puk” >,< ”pin” >
Examples
$PFAL,GSM.PUK,”22222222”,”1111”
Responses -
Command description
This command unblocks the SIM card by entering the associated PUK code.
Parameter Description
<”puk”>
Entering incorrect PIN three times, the SIM card will be blocked. To unblock it,
you have to enter the PUK code of the used SIM card, wrapped in quotation
marks (
“ ”
). After ten failed attempts to enter the PUK, the SIM card will be
invalidated and no longer operable. In such a case, the card needs to be
replaced. PIN consists of
4
to
8
digits, PUK is an
8
-digit code only.
<”pin”>
It specifies the PIN number of the used SIM card, wrapped in quotation marks
(“
“)
.
3.2.5.1.3 GSM.IMEI – Gets the serial identification number of the device
Command syntax $PFAL,GSM.IMEI
Examples
$PFAL,GSM.IMEI
Responses
e.g $IMEI:357023000327552
Command description
This command returns the serial identification number of the target device.
Parameter Description
None
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 101 of 271