FALCOM MAMBOII, Руководство пользователя

Страница: 56 / 271

C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
- V
ERSION
1.0.0
3.2.1.7 “MACRO” command index
3.2.1.7.1 Sys.Macro< index >– Activates configured Macros
Command syntax Sys.Macro< index >
Examples $PFAL,Sys.Macro 0
Responses
E.g.
$activate macro 0
Command description
This command is intended to activate a configured Macro. To configure a Macro,
please refer to the corresponding index of the parameter (
MACRO<index>
). Using
of different indices enable you to execute up to 50 commands set into a single
alarm (
AL
). How to set a Macro refer to the chapter 3.2.25.1.1.9.3 page 233.
Parameter description
<index>
Determines the index of the macro to be activated. Up to 20 macros are
available for use. It can be set to a value from
0
to
19
.
Notes
•
The command does not directly execute a macro several times, even if the
macro is activated, e.g. by an event, it will execute the Marco just once.
•
Of course, a macro can be executed several times, but the time between 2
macro activations depends on how much time the macro needs to execute
all set commands before it will be reactivated.
•
If the time-span between two macro activations is too short, then only a part
of set commands within a macro might be executed twice.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 56 of 271