FALCOM MAMBOII, Руководство пользователя

Страница: 139 / 271

C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
- V
ERSION
1.0.0
3.2.8.2 “IOBOX” command index
3.2.8.2.1 IEEE.IOBox< ib_div_index >.OUT< oindex >=< config_type > – Configures
outputs of I/O-BOX
Command syntax $PFAL,IEEE.IObox< ib_div_ndex >.OUT< o_index >=< config_type >
Examples
$PFAL,IEEE.IOBOX0.OUT1=hpulse,1000
Responses
Command description
This command sets the configuration type of the digital outputs onto the different
I/O-BOX devices.
Parameter description
<ib_div_ndex>
A number from
0
to
5
that determines the I/O-BOX device being selected. You
could specify an index value of an I/O-BOX device that is already connected to
the MAMBOII. The <
ib_div_ndex > index should correspond to one of the
< cnf_ib_div_index >
indexes that you have assigned on the I/O-BOX configuration
setting.
<o_index>
Identifies the output index of the I/O-BOX device to be configured. It can be set
to a value from
0
to
3
corresponding to the provided output of the I/O-BOX
respectively. Pin designations for the 16-pin MOLEX connector of the I/O-BOX are
shown in chapter
6.10.3 .
<config_type>
Configures settings related to the selected output. It can be set to:
Value Meaning
high
Sets the specified output
to high
.
low
Sets the specified output
to low
.
hpulse ,< high_time >
Sends high pulses to
the specified output port
for a
specified interval
< high_time >
, in milliseconds.
< high_time >
Specifies the number of milliseconds for ON-time period.
3.2.8.2.2 IEEE.IOBox< ib_div_index >.power=< power_mode > – Changes the
operation mode of I/O-BOX
Command syntax $PFAL,IEEE.IOBOX< ib_div_ndex >.power=< power_mode >
Examples
$PFAL,IEEE.IOBOX0.power=sleep
Responses
Command description
This command serves to change the operation modes of the I/O-BOX devices. With
this command you can put an I/O-BOX into SLEEP mode for a predefined length of
time. By default, each I/O-BOX runs in continuous mode.
Parameter description
<ib_div_ndex>
A number from
0
to
5
that determines the I/O-BOX device being selected. You
could specify an index value of an I/O-BOX device that is already connected to
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 139 of 271