3. Connect Your Device
• Plug in the Device Port from your
cable to the Raven Device
• Carefully align the pins, and push
the attachment straight into the
device until you hear it lock in place
• Do not push the attachment in at
an angle or use too much force
1. Locate The Diagnostics Port
• Usually located under the steering
console (see the asterisks (*) on the
diagram to the left for potential
Diagnostic Port locations)
2. Cable Installation
• Y-Cable Installation
• Remove the vehicle’s existing
Diagnostics Port from its mount
• Connect the vehicle’s Diagnostics
Port
to Diagnostic Plug of the Y-Cable
• Mount the Replacement
Diagnostic Port of the Y-Cable
to where the original vehicle’s
Diagnostic Port was located to
allow further diagnostics without
interruption of service
• Direct Cable Installation
• Connect the Diagnostic Plug of
the Direct Cable into vehicle’s
Diagnostic Port
MORE
→
RTV-40 Tracker Installation
OBDII
9-Pin
6-Pin
Diagnostic
Plug
Device
Plug
Direct Cable
Diagnostic
Plug
Device
Plug
Y-Cable
Possible Connections
Replacement
Diagnostic Port
RTV-40 Tracker
