Fairlight Prodigy, Редактировать руководство пользователя, Страница: 59 / 148

TM
User Manual Page
59
Wave
Edit
Takes
Nudge
Track
Block
Name
Grab
B/Up
Fade
Space
Level
=
+
17. Fades
Each clip can be given a fade-in and fade-out. These are performed in the digital domain before the audio is
converted back to an analogue signal at the output. When the fade of one clip is placed over another clip, a
crossfade between the two clips occurs.
Press the Fade key and select the track(s) on which you want to fade clips. The clips to be faded are the ones on the
selected tracks which lie directly underneath the cursor.
The Fade menu achieves the fade-in and/or fade-out. If two fades lie on top of each other, only the fade on top will
act, and the clip underneath will crossfade as illustrated above.
The Fade Menu
AutoIn AutoOut X-Level
head tail 4 fr 4 fr -3 dB
Causes a fade from -×
dB at the Head of the
clip to the clip level at
the cursor
Causes a fade from
the clip level at the
cursor to -× dB at the
Tail of the clip
Select a number of
frames up to 99 to be
the Auto fade in time,
then hit ENTER to ex-
ecute the fade-in.
Select a number of
frames up to 99 to
be the Auto fade out
time, then hit EN-
TER to execute the
fade-out.
Sets the level at the mid point of new fades,
where both clips have the same loudness. In
theory this should be set to -6 for perfectly
in phase audio, and to -3 for completely
randomly phased audio. You can also set
the value outside these limits to achieve
desirable fade in and fade out contours.
X-Point
It is possible to move the “mid-point” of the
fade earlier or later in time. To do this, hold
the SHIFT key and press this Soft Key. Its
label will change to X-Point, and you can
enter the position of the mid point as a
percentage of the duration of the crossfade.
New Feature: the current values of X-
Level and X-Point can be "captured" for
either end of the current fade by pressing
<Blue-head> or <Blue-tail>. Then they
can be applied to any other clip, or
edited in place.
Notes
1. Auto In and Auto Out can be performed together.
2. You can use the mouse to change the value of X-Ratio even when it is not displayed. Just click anywhere
inside the graph at the top of the screen, then press ENTER to lock in the value.