manualshive.com logo in svg

Fairlight Prodigy, Редактировать руководство пользователя, Страница: 105 / 148

Поделиться
Скачать
Fairlight Prodigy Скачать руководство пользователя страница 105

TM

User Manual

Page

 105

Export

MFX

Preroll

Offset

GPI

ADR

Edit

Loop

Edit

Mark

29.

The Export Menu

The Export menu allows material to be exported from Prodigy Projects into a variety of formats.

Export

MFX

Preroll

Offset

GPI

ADR

Edit

Loop

Edit

Mark

dubber

file

WAV

Pro

Redbook

export

exchange

Export

Tools

CD

Exports a file to the root of the
current disk drive, which can
be read by Fairlight's DaD
Dubber product. The file will
be named XXX.DL where
XXX.MT is the name of the
currently open Project.

Exports a file to the root of the
current disk drive, which can be
read by Fairlight's File Exchange
partners. The file will be named
XXX.ML where XXX.MT is the
name of the currently open Project.

Opens the WAV Ex-
port submenu, used
for turning audio
into WAV files. See
next page.

Opens the CD
Submenu, used
for outputting an
Prodigy track to
Redbook CD
over SCSI.

The CD Submenu

The CD submenu allows one track of stereo (or mono) audio to be written directly to a Yamaha CRW4416S Com-
pact Disc writer (note: this model changes from time to time - please consult your Fairlight distributor if model
unavailable). A range is set up to indicate the start and end of the Compact Disc, which cannot exceed 75 minutes
in duration. The following controls are available on the submenu:

test

real

eject

write

write

Ejects the CD from
the drive.

Starts a test write. This will go through the entire write procedure,
checking everything works, but will not actually burn a CD. Useful
for saving media if uncertain about the result.

Writes the audio to the
CD at twice real speed.

Initiates export to a ProTools
file. First you must choose a
destination on the network or
on a local drive, then press
ENTER to begin. All recorded
media are copied to the file.

Содержание Prodigy





















































































































































Отзывы:

Нет отзывов