40i TS - v1205 - Installation/Operation - (4/29)
1.3 Main screen description:
When the spindle is off, the RPM and CSS displays show the programmed values.
When the spindle is ON and there is an encoder on the spindle, the RPM and CSS displays will show
the current value; but if there is no encoder, they will show their theoretical values.
1.4 Function bar
The function bar gives access to the various functions offered by the DRO.
1.4.1 Access to functions:
Active tool Nr.
Display units mm/inch
Display mode:
INC/ABS
Set/Clear
Chronometer
DISPLAY AREA
STATUS BAR
FUNCTION BAR
Current tool
Current/programmed RPM
Current/programmed CSS
CSS mode ON
Spindle orientation
Current range
TOOL
Set tool Nr.
Teach-in
Tool table
DISPLAY
Set/Clear
inc/abs
mm/inch
FUNCTION
Home search
Setup
Setup
RPM
Angle measurement
Calculator
CSS
Turning
rad/diam
