40i TS - v1205 - Installation/Operation - (24/29)
3.6.5.3
Range configuration
It sets the values for range control
Automatic range (gear) detection: For safety, the DRO
will control the current range by reading the digital inputs.
External speed box: For safety, an external box or
selector that indicates to the DRO the maximum RPM
allowed.
Automatic range (gear) change. The gear change can
be done automatically.
M-done signal: For safety, wait for the M-done signal
before considering that the gear change is completed and
moving the spindle.
3.6.5.4
RPM table for each range
For setting the gear range to control the spindle speed.
Automatic range (gear) configuration: It reads the
correct position of the gear lever through its digital inputs.
Range: Gear range position
Min: Minimum rpm value that may be preset for this range.
Max: RPM value for an analog signal of 10V.
Comp: Compensation for the analog signal. Useful to
adjust the machine when working in open loop.
3.6.5.5
Gear (range) detection inputs
To set the value of the inputs for each range.
Setup
Setup
Param. Instal.
Machine Control
Range
Setup
Setup
Param. Instal.
Machine Control
RPM
Range
Setup
Setup
Param. Instal.
Machine Control
RPM
Range
Inputs
