Fagerhult e-Sense Organic G3, Руководство пользователя

Страница: 8 / 31

8
Subject to change without notice. Version5_20200424
Explanation of relay function
The Relay function facilitates the programming of multiple
luminaires that will have the same setting.
For example, change the dwell time after last presence
from 10 min to 20 min on one luminaire. Save the change
with the app. You can now “relay” the setting to the other
luminaires in the same zone. Press Relay. The program-
med sensor will now flash once per second for 30 seconds.
The other sensors will have a solid red light under the PIR
sensor. This gives you time to ensure that all luminaires
have received the information. After this, all sensors revert
to normal operation, but with a 30-second change across
the entire installation.
One function that cannot be used as above is luminaire
zoning. For this, you will need to point the dongle at each
luminaire that will change zone. If you have multiple
luminaires, you can press the zoning button and hold it in
while moving underneath the luminaires being program-
med. The sensor will flash red.