Fagerhult e-Sense Organic G3, Руководство пользователя

Страница: 23 / 31

23
”Switch ID Pairing One to One” is very similar to “Switch ID Pairing”. The only difference is that the paired sensor node/
nodes does not distribute the message on to other nodes via IR. This configuration is best suited when wanting to control
one sensor node individually within a large zone e.g. an open office area. It’s possible to pair more than one node within
the wall switches range (about 10m). Since no messages is sent via IR the lighting control is very stable on the paired
luminaires.
Note!
It is of most importance that SN3 nodes with FW (firmware) 181 or later are used. Earlier versions of SN3 nodes do not
have this function. Used the Query function to see what version the node has (Note: Only works with iOS devices).
Switch ID Pairing One to One
Subject to change without notice. Version5_20200424