Fagerhult e-Sense Organic G3, Руководство пользователя

Страница: 29 / 31

29
Subject to change without notice. Version5_20200424
Other parameters
Here you can adjust sensor sensitivity settings.
“Motion Sensitivity” – A highly sensitive PIR sensor may
detect heat sources that do not display the correct move-
ment, i.e. any type of heat source such as, ventilation, a
photocopier, curtain, etc. By increasing or decreasing the
sensitivity you can avoid this type of problem.
“Burn in Mode” – This function locks the system at 100%
for 100 hours, which is a sufficient amount of time for new
fluorescent tubes to burn in. This function must not be
used for other light sources.
“Firmware Interrogation” – This function is not used in
a working system, but exists to help retrieve diagnostics
from a node if there have been problems. The function
must only be used together with servicing personnel from
Fagerhult.