Fagerhult e-Sense Organic G3, Руководство пользователя

Страница: 26 / 31

26
Subject to change without notice. Version5_20200424
Wireless communication between nodes without IR link
Nodes belonging to the same zone but unable to communicate due to physical barriers can be programmed to use the
wireless communication to transmit further presence information and changed settings. This can be used in situations
where a group of nodes in the same zone is separated by physical barriers that prevent IR messages from being propaga-
ted over physical barriers.
NOTE
It is of most importance that SN3 nodes with FW (firmware) 175 or later are used. Earlier versions of SN3 nodes do not
have this function. Used the Query function to see what version the node has (Note: Only works with iOS devices).
Any Sensor Node can be configured to:
Transmit occupancy or configuration message via Bluetooth Low Energy (BLE), and/or Receive any occupancy or confi -
guration message via BLE.
There is no one-to-one pairing involved. This means that any Receiver that can receive the message sent by a Transmitter
will act on those messages as long as both transmitter and receiver are in the same zone or linked to share messages. Note
that BLE has a long range. To limit (or extend) the BLE range, the Transmission Power can be adjusted.
Information about what node
version this is available for. Settings on enable/disable
transmission and reception and
adjustments of signal strength