17
Subject to change without notice.
Version5_20200424
Lighting scenes can be used to select a specific light setting at a certain time. Selecting a scene stops active daylight dim
-
ming and presence detection. This is suitable for conference rooms and similar spaces. Each sensor can be adjusted sepa
-
rately to provide the required lighting. Lighting scenes are most easily recalled using the wall panel.
1.
Select the “Scenes” function in the app. Use Configure Scene 0 (for example) to adjust the light from the luminaires.
It is located on the wall panel’s “Scene A”.
2.
Adjust the brightness of an luminaire, or for the entire zone.
3. Save the preferred setting.
4.
Test the different scenes using the “Go to” buttons.
5. Under “Scene Functions” you can choose to revert to normal function (e.g. daylight dimming) with “Revert to Auto
Mode”.
The “Set Scene as Start Up Mode” function is used to de-
termine what should happen after a power failure. When
power is restored, you can check that the light does not
switch on, or switches on in a predetermined mode. It may
be a “hidden” scene that is not located on any touch panel.
If you have prepared a scene to operate at power start up,
you can enable it in this menu. Point the dongle at the
desired sensor, repeat for each luminaire, or use the relay
function (relay).
Configuring Scenes
Start Up Mode
1
4
5
2
3
Содержание e-Sense Organic G3
Страница 1: ...e Sense Organic G3...
