09-2007
The manufacturers reserve the right to change the products without any previous notice
Distributor’s box
MEC 200
ELECTRO-MECHANICAL SLIDING GATE OPERATOR
IMPORTANT WARNING NOTES
- Before installing the equipment carry out a
Risk Analysis
and fit any required device in compliance with EN 12445 and
EN 12453 Safety Norms.
- lt is recommended to keep to the instructions in this booklet - make sure that the motor specifications as printed on the
motor sticker conform to those of the mains.
- Dispose properly of the packaging materials such as cardboard, nylon and polystyrene through specialized companies.
- Should the operator be removed,
do not cut
the electrical cables, but properly remove them by loosening the pins in the
terminal board.
- Switch off the mains switch before the cover of the cable junction box is removed.
- All the equipment must be properly earthed by the yellow/green cable marked with the specific symbol.
- It is recommended to carefully read the regulations, advice and remarks in the book “Safety Norms”.
The growth of MECCANICA FADINI has always been based on the development of guaranteed products thanks to our “TOTAL
QUALITY CONTROL” system which ensures constant quality standards, updated knowledge of the European Standards and
compliance with their requirements, in view of an ever increasing process of improvement.
EUROPEAN MARK CERTIFYING CONFORMITY
TO THE ESSENTIAL REQUIREMENTS OF THE
STANDARDS 98/37/EC
•
DECLARATION OF CONFORMITY
•
SAFETY NORMS
•
EN 12453, EN 12445 STANDARDS
•
CEI EN 60204-1 STANDARDS
•
WARRANTY CERTIFICATE ON THE CUSTOMER'S REQUEST
The “CE” mark certifies that the operator conforms to the essential requirements of the European Directive art. 10 EEC 73/23, in
relation to the manufacturer’s declaration for the supplied items, in compliance with the body of the regulations ISO 9000-UNI EN
29000. Automation in conformity to EN 12453, EN 12445 safety standard.
CHECKING AND MAINTENANCE
:
To achieve an optimum performance and longer life of the equipment and in observance of the safety regulations, it is recommended
that inspections and proper maintenance are made by qualified technicians to the whole installation ie. both the mechanical and
electronic parts, as well as wiring.
- Mechanical parts: maintenance every 6 months approx.
- Electronic apparatus and safety equipment: maintenance every month approx.
DISPOSE OF PROPERLY
ENVIRONMENT-NOXIOUS MATERIALS
2003/108/CE
Directive for
waste electrical and
electronic equipments
GB
AUTOMATIC GATE MANUFACTURERS
s.n.c.
®
Via Mantova, 177/A - 37053 Cerea (Verona) Italy
Tel. +39 0442 330422 r.a. - Fax +39 0442 331054
e-mail: [email protected] - www.fadini.net
