English
electro-mechanical sliding gate operator
25
FASTENING THE LIMIT SWITCH BRACKETS TO THE GEAR RACK
Pic. 11
SX left bracket
of the magnetic
limit switch
DX right bracket
of the magnetic
limit switch
!
ATTENTION
: do not open and invert the single magnets inside the limit switch plastic brackets.
These have already been properly installed to be identified by programmer logic.
!
NOTE WELL
: IT IS MOST IMPORTANT THAT THE GATE DOES NOT RUN INTO THE GATE STOPS IN OPENING AND CLOSING
CYCLES. A 30-50 mm CLEARANCE IS RECOMMENDED ON LIMIT SWITCH ENGAGING, AS INDICATED.
30-50 mm
!
30-50 mm
!
max 10 mm
!
JUNIOR 624
