2
3
1
Pic. 10
Pic. 9
Pic. 8
electro-mechanical sliding gate operator
ANCHORING THE JUNIOR
English
ELECTRICAL POWER SUPPLY TO THE PROGRAMMER
DISTINCTION OF JUNIOR INSTALLED ON THE RIGHT OR LEFT
24
The first operation to be performed is to identify the Junior installation with respect to the opening of the gate, moving dip-switch n° 11 on
the Elpro 64 programmer (already installed on the Junior 624), depending on the position of Junior as seen inside the gate to be opened
(Pic. 10).
17
2 mm
!
opening direction
opening direction
Junior installed to the
LEFT
:
position dip-switch
n° 11
to
OFF
OFF
11 12
Junior installed to the
RIGHT
:
position dip-switch
n° 11
to
ON
ON
11 12
JUNIOR 624
ATTENTION:
disconnect the 230 Vac
electrical power supply from the
system by the mains switch
!
NO
230 V
V
2
Terminal board for Junior
power supply