40 mm
Junction box
M10 plug
(not supplied)
must be anchored
projecting 40 mm
from the ground
- n° 1 base plate
- n° 4 anchor bolts
- n° 8x M10 hexagonal nuts+washers
47 mm
Junction box
English
electro-mechanical sliding gate operator
23
CASING OPENING
ANCHOR PLATE
Pic. 5
Pic. 4
ANCHORING WITH A BASE PLATE
ANCHORING WITH PLUGS (not supplied)
Pic. 7
Pic. 6
!
ATTENTION
: once the two side screws have
been removed, lift the casing and vertically
pull it out, without tearing off the led card
cable connector.
Position and anchor the base plate at a distance of
60 mm
from the
gate to be opened, levelling it flat.
It is important that the threading should project
40 mm
from the
ground.
ATTENTION
: the nut under the plate must be
47 mm from the end of the bolt.
JUNIOR 624
60 mm
!
60 mm
!
