52.
Install the passenger upper a-arm into the factory a-arm
mounts and attach with the factory a-arm hardware. (use
supplied thread-locking compound) Leave loose. SEE
PHOTO BELOW
53.
Locate the factory knuckle assembly and hardware. Position
the assembly onto the CV shaft and attach to the lower
control arm with the factory hardware. Then attach to the
upper control arm also with the factory hardware. Torque
upper and lower control arm bolts at the frame and at the
knuckle to 32 lbs. (use supplied thread-locking compound)
SEE PHOTOS ON NEXT PAGE.
54.
Locate and install the factory hub assembly onto the knuckle
and axle shaft. Install the factory axle shaft nut and torque to
190 lbs. (use supplied thread-locking compound) Use a
center punch and re-crimp the hub nut in the key way of the
axle SEE PHOTOS IN NEXT COLUMN.
