Fabdec DARI-KOOL GALA-KOOL Pro, Инструкция по установке и эксплуатации

Страница: 3 / 92

Page 3
Contents
9. Other information
9 Page .1 Butterfly valve (manual or pneumatic) 74
.2 Safety switch for manual butterfly valve 9 Page 75
9 Page .3 Robot control 76
9 Page .3.1 Cleaning release by robot 77
9 Page .4 Different variants for cooling start delay 78
.5 Compressor switch-on delay / pre-agitating 9 Page 80
9 Page .6 Emergency cooling / sensor failure 80
9 Sensor correction procedure Page .7 80
.8 Function second temperature sensor 9 Page 81
9 Page .9 during cooling Level alarm 81
9 Page .10 Automatic / convenience functions 81
.11 Heating control 9 Page 82
9 Page .12 Function of pressure switch – Effect on pump and heater 82
.13 Air in the cleaning pump -> automatic 9 venting Page 83
9 Page .14 Level control setting 84
.15 Detergent injection position 9 Page 85
.16 Configuration of the different stages 9 Page cleaning 85
9.17 Setting of a break in the cleaning programme Page 86
9.18 Page 86 Function test alarm
9.19 Activation delay tank monitor Page 87
. Procedure following power failure 88 9 20 Page
9 21 Power Page . pack (optional) 88
9 22 Page . Agitator monitoring module (optional) 89
9.2 Page 3 90 General measures when using electronic control systems