FAAC FAACTOTUM, Руководство пользователя

Страница: 7 / 22

Select the source from which you wish to load the program:
1 = From 460P if you wish to work on the program already present on the card
2 = From the memory if you wish to work on a program previously saved in the
FAACTOTUM memory
Make the choice by moving the arrow-shaped cursor alongside the desired
option using the
ò
and
ñ
keys and pressing ENTER, or key in the corresponding
number directly.
1
F1
2
F2
or
PG
PG
ENTER
+
8. PROGRAMMING
LOAD
PROGRAM
1->FROM 460P
2 FROM MEMORY
2
F2
1
F1
CONNECT TO 460 P
AND PRESS ENTER
SELECT MEMORY WITH
ñ
AND
ò
THEN PRESS ENTER
MEMORY : 1 xxxxxxxx
ENTER
ENTER
DO YOU WANT TO
1-> CHANGE
2
TRANSFER
1
F1
2
F2
ENTER
CONNECT TO 460 P
AND PRESS ENTER
ENTER
PROGRAMMING
XXXXXXXX
PRESS ENTER TO CONT.
1
F1
2
F2
NUMBER OF OPERATORS?
1->ONE 2 TWO
A
go to “8.7 TRANSFERRING THE PROGRAM TO THE CARD” à
E
(cont.)
To load the program from the 460P, the FAACTOTUM must be connected to it
using the appropriate cable.
- If the FAACTOTUM is already connected, press ENTER
- If the FAACTOTUM is disconnected, connect it and press ENTER
If you press ENTER with the FAACTOTUM disconnected, an error message ap-
pears.
In this case press ENTER to return to this menu.
ENTER
To load the program from the FAACTOTUM’s internal memory, it must be selected
from those available.
Each program in the memory is represented by a number (01 to 16 indicating its
memory location) and an 8-character alphanumeric identification. If you know
the number, enter it (the corresponding identification will appear) and press ENTER.
Alternatively, pressing the
ò
and
ñ
keys displays all the memory locations one at
a time along with the resident program identifications. To select the desired pro-
gram, press ENTER when its identification is shown.
or
1
6
2
7
3
8
4
9
5
0
F1 F2 F3 F4 F5
* / - +
.
PG
PG
ENTER
+
Once the program resident in the FAACTOTUM memory has been selected, it is
possible to:
1 = Modify it then save in memory
2 = Transfer it directly to the 460P
Make the selection by moving the arrow-shaped cursor alongside the desired
option using the and
ò
keys and pressing ENTER, or directly enter the number
corresponding to the desired function.
ò
1
F1
2
F2
or
PG
PG
ENTER
+
To transfer the program to the 460P the FAACTOTUM must be connected to it using
the appropriate cable.
- If the FAACTOTUM is already connected, press ENTER.
- If the FAACTOTUM is disconnected, connect it and press ENTER.
The subsequent menus allow the program to be transferred.
If you press ENTER with the FAACTOTUM disconnected, an error message appears.
ENTER
ENTER
The identification of the program loaded from the 460P is displayed.
If appears, this means that the 460P standard configuration has
been loaded.
Press ENTER to proceed.
òò ò ò ò ò ò
5
Number of operators present in the automation:
1 = Single leaf (1 operator)
2 = Double leaf (2 operators)
Make the selection by moving the arrow-shaped cursor alongside the desired
option using the
ï
and
ð
keys and pressing ENTER, or key in the corresponding
number directly.
1
F1
2
F2
or
ENTER
+
ò