FAAC A952, Руководство пользователя, Страница: 82 / 94

A952 80 532310 - Rev.A
A952
PRIMARY
ID=1
A952
SECONDARY
ID=2
A952
SECONDARY
ID=15
A952
SECONDARY
ID=3
60
61
14.1 INTERMODE
60
shows the ID to assign to the A952 units in the
network.
The system consists of a PRIMARY unit and a maximum
of 14 SECONDARY units. The PRIMARY A952 is the
only unit on which the operating mode should be
set, which is then also applied immediately to all the
SECONDARY units.
L
With INTERMODE, it is not possible to change the
operating mode of an individual unit.
The PRIMARY A952 must be assigned ID1 and the
SECONDARY units an ID from 2 to 14.
14.2 INTERLOCK
61
shows the ID to assign to the A952 units in the
network.
Either of the two units can be designated as the PRI-
MARY and the other as the SECONDARY. In Interlock
mode, one door can open only if the other is closed.
The available variations are shown below.
If the PARTIAL mode is associated with interlock, only
the leaf opens.
L
Connect the devices and carry out the programming
and SETUP of the individual A952 units before
configuring the interlock using KP EVO.
Select on the PRIMARY unit to activate the
interlock.
A952
Interlock
PRIMARY
ID=1
A952
Interlock
SECONDARY
ID=3