background image

Timeline capabilities

The customizable timeline capabilities give you the ability to produce a statistical analysis based on a
specified range of time. When you first open the analytics dashboard, the default refresh time is set at 5
minutes. You can change the refresh rate to several different settings by selecting from the 

5 min.

 list at

the top of the screen.

1 min.

5 min.

, or 

10 min.

 options reset the refresh time in minutes.

Off

 freezes the data refresh collection.

You can also update the statistics on demand by selecting 

Refresh

 above the timeline.

Customizing timeline capabilities

You can customize the range of time in which you would like to view data, in both the charts and tables.
When you first launch the analytics dashboard, the default range of time is set at the 

Last hour

. You can

change the range of time that appears on the timeline to several different settings.

1.

On the Main tab, click 

SSL Orchestrator

 > 

Analytics

 > 

Statistics

 to view the default charts, on the

left, and dimensions, such as Client Cipher Names, Virtual Servers, and Actions, on the right. The
default time for collecting data is set to show statistics gathered over the last hour.
The Statistics screen opens.

2.

Above the timeline, from the 

Last hour

 list, select the range of time you would like to view statistics

across.

Last hour

Last 4 hours

Last day

Last week

Last month

Last year

Year to date

All

The range of time you specified appears above the timeline bar.

3.

Use the timeline sliders at each end of the timeline, to manually scroll back and forth, further
narrowing in on ranges of time that are critical to the ongoing performance and health of your
system's SSL orchestration.
Once the sliders have been manipulated, you can also click and drag the bar above the timeline based
on the newly specified timeline.

Chart capabilities

You can reorder the customizable line charts by dragging them up or down to a different place in the
chart stack. You can also minimize them so to hide their information.

Using Herculon SSL Orchestrator Analytics

48

Содержание Herculon SSL Orchestrator



























































Отзывы: