F5 Herculon SSL Orchestrator, Настройка

Страница: 12 / 58

See the Diagnosing your Herculon SSL Orchestrator deployment section for more detailed information
on how to monitor the success or failure of your device undeployment. If successful, your entire
configuration is now removed from your system.
Diagnosing your Herculon SSL Orchestrator deployment
You can diagnostically monitor each deployment and undeployment for a device configuration whether
you are deploying a single device or multiple boxes in a high availability (HA) device group. The system
displays an application status message above the network diagram indicating whether your device or
device group has successfully
Deployed
or suffered an
Error
.
When there are multiple devices in a device group in an HA scenario, the application status message
displays the state of the deployment as one system. For example, if two out of four devices in a device
group deploy with errors, the application status message displays
2 Error
, indicating two devices
suffered an error during deployment.
If you click View Details next to the application status message when you have multiple devices in a
sync group, the Application Status dialog box opens. The Application Status table lists each BIG-IP
®
device with individual links to the Diagnostic screen. The Diagnostic screen displays the current device's
deployment information and assists in further diagnosing any issues.
After completing a F5
®
Herculon
™
SSL Orchestrator
™
configuration deployment, or if you are
performing an undeployment, you can diagnose your deployment status.
1. On the Main tab, click SSL Orchestrator > Configuration .
The General Properties screen opens.
2. On the General Properties screen, click either Deploy or Undeploy .
Above the network diagram, the application status displays a spinning wheel with the message
Currently being deployed
or
Currently being undeployed
.
Once the process is complete, the application status message displays
Deployed
,
Undeployed
, or
Error
.
3. If you have multiple devices in a device group, click View Details . If you are deploying or
undeploying a single device, proceed to step 4.
If your deployment or undeployment is successful, the Diagnostic screen opens.
If your deployment or undeployment is not successful, the Application Status dialog popup opens
showing each BIG-IP device with individual links to the Diagnostic screen.
4. Click OK to close the Application Status dialog popup table, or click the link in the Details column
for a particular device to open the Diagnostic screen.
The Application Diagnostic area shows details for the current device that you selected. This is
information you can use to further diagnose your application status.
5. On the Main tab, click SSL Orchestrator > Configuration , and on the menu bar, click Diagnostic to
view diagnostic information on your current device.
The Diagnostic screen opens.
Configuring the System for F5 Herculon SSL Orchestrator
12