F5 Herculon SSL Orchestrator, Настройка

Страница: 43 / 58

6. Click Retrieve Device Information .
The screen shows Verify Device Certificates (Step 2 of 3).
7. Click Device Certificate Matches .
The screen shows Add Device (Step 3 of 3).
8. In the Name field, type the name of the device you are adding.
9. Click Add Device .
At the upper right, next to the F5 logo, the status of your device should show
ONLINE (ACTIVE)
and Connected , with a green indicator next to them showing its active and connected status.
Creating a sync-failover device group
For an HA configuration, you need to establish failover capability between two or more BIG-IP
®
devices.
Then, if an active device in a sync-failover device group becomes unavailable, the configuration objects
fail over to another member of the device group, and traffic processing is unaffected. You perform this
task on any one of the authority devices within the local trust domain.
1. On the Main tab, click Device Management > Device Groups .
The Device Group List screen opens.
2. Click Create .
The New Device Group screen opens.
3. In the General Properties area, name your new device group and select the group type.
a) In the
Name field, type the name of your device group.
b) From the Group Type list, select Sync-Failover .
4. For the Configuration setting, retain the Basic configuration type, and then select members and
define the sync type.
a) In the
Members setting, select available devices from the Available list and add them to the
Includes list.
b) From the Sync Type list, select Manual with Incremental Sync .
Note: You must do a manual sync. If you select Automatic with Incremental Sync, your HA
deployment will fail.
5. Click Finished .
The Device Groups list screen opens, listing your new device group. The ConfigSync Status column will
indicate
waiting Initial Sync
.
Synchronizing the device group
For an HA configuration, you need to synchronize the BIG-IP
®
configuration data from the local device
to the devices in the device group. This synchronization ensures that devices in the device group operate
properly. When synchronizing self IP addresses, the BIG-IP system synchronizes floating self IP
addresses only.
1. Next to the F5 logo, click Awaiting Initial Sync .
On the Main tab, you can also click Device Management > Overview .
The Device Management Overview screen opens, showing your Device Groups.
2. In the Sync Issues area, select ha to expand the Devices and Sync Options areas of the screen.
3. In the Devices area, select the device showing
Changes Pending
.
4. In the Sync Options area, select Push the selected device configuration to the group .
5. Click Sync .
You have now completed your F5
®
Herculon
™
SSL Orchestrator
™
HA deployment. Next, set up a basic
configuration for deployment on your active device.
F5 Herculon SSL Orchestrator: Setup
43