F.F. Group GCS 125T EASY, Оригинальное руководство пользователя

Страница: 14 / 44

| English 14
GCS 125T EASY - GCS 225T PLUS
f
Cutting on the push stroke may be dangerous, since
a kickback may happen.
f
Make sure that the chain is well ten -
sioned, so as not jam during cutting.
If the chain jams during the cut, stop the engine of
the chainsaw immediately. Use a lever to lift up the
cut wood and free the chainsaw.
f
Make sure that the wood will not split during cut.
f
Make sure that the chain will not touch the ground
during cut.
SAFETY RULES ON HOw TO AVOID KICK -
BACK
kickback is a very sudden movement of the chain -
saw. It happens when the user cut an object with
the upper quadrant of the bar nose and the chain -
saw bar jumps off the object, towards the user.
kickback may become very dangerous for the user
and therefore, be extremely cautious when limb -
ing and avoid contacting the log with the nose of
the bar. Moreover, be very cautious with the limbs
under tension, since they can move backwards
and towards you like a spring, which can cause you
serious injury.
MAINTENANCE
DAILY MAINTENANCE
f
Clean the outside area of the machine
f
Clean the air filter and replace it if needed
f
Clean the chain brake
f
Clean the bar
f
Sharpen the chain
f
Functionaly check the chain lubrication
f
Check the operation of the chain brake
f
Functionaly check the operation of the stop switch
f
Check the sealing of the fuel tank and oil tank caps
f
Check the operation of the throttle lock
f
Change the direction of the bar
f
Check the chain and bar for visible damages and
cracks
f
Clean the starter
f
Make sure that the chain does not rotate at the idle
speed
f
Check the chain catcher for damages and replace if
needed
wEEKLY MAINTENANCE
f
Clean the cylinder area and fins
f
Check and replace the spark plug if needed
f
Check and lubricate the clutch drum bearing
f
Check the vibration elements for cracks
f
Clean the outside area of the carburator
f
Check the clutch dram sprocket for wear
MONTHLY MAINTENANCE
f
Check the fuel filter and fuel hose. Replace if needed
f
Replace the brake band if less than 0,6mm
f
Clean the fuel tank and oil tank
f
Check that the electrode gap of the spark plug is
0,5mm (Figure 9)
ENVIRONMENTAL pROTECTION
Recycle raw materials instead of disposing
as waste. Machine, accessories and pack -
aging should be sorted for environment -
friendly recycling. The plastic components
are labeled for categorized recycling.
GUARANTEE
This product is warranted in accordance with the le -
gal/country specific regulations, effective from the
date of purchase by the first user. Damage attribut -
able to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In
case of a claim, please send the machine, complete -
ly assembled, to your dealer or the service center for
electric power tools.