11
If any part of the cooker is warm, use extreme caution when handling the appliance or
wait until it has cooled completely before attempting any of the suggested solutions .
Troubleshooting
Problem
Potential Reasons
Solutions
Lid will not close or lock
Gasket is not
properly installed
Reinstall the gasket,
making sure it fits around
the inner lid completely
The float valve is
obstructed by the push rod
Push the rod by hand to
make room for the float
valve
Unable to open lid after
pressure is released
Float valve is still up
Press down on the float
valve
Pressure has not
completely released
Wait until pressure has
completely released
The cooker does not
reach pressure
The pressure release valve
is not positioned correctly
Turn the pressure release
valve to Closed Vent
There is not enough food
or liquid in the cooker
Check recipes in the EZ
Bean Cooker manual for
appropriate quantities
Steam is escaping from the
rim of the lid and/or the
pressure release valve
Check the gasket to make
sure it is in good
condition and installed
properly . Check the
pressure release valve to
make sure it is turned to
Closed Vent .
If problem
cannot be fixed, contact
Customer Service
(page 12)
Steam escapes from
the cooker
The gasket needs
to be cleaned
Remove gasket and clean
with warm soapy water;
dry with a clean cloth and
replace
The gasket is warped
or cracked
Replace the gasket .
Contact Customer Service
to order a replacement
(page 12)
Liquid sputters out of
pressure release valve
Too much liquid at
high pressure
Allow pressure to naturally
release for about five
minutes - close release
valve and let the cooker
cool down
C1/C2/C6 error codes
Sensors fail
Contact Customer Service
(page 12)
C5 error code
Overheated
Make sure inner cooking
pot is installed correctly
and that there is adequate
liquid in the cooker
Содержание Bean Cooker
Страница 1: ...TM U S E R M A N U A L...
