XMP 240 C AT • DSP Configurator Software
40
Cancel Button
— Reverts any changes made to the contained parameters back to
their states when the
Automix
dialog box was opened and closes the dialog box.
Automix Help Button
— Opens the
Automix
topic of the
DSP Configurator Help
file for
further assistance in configuring the automix processor.
Automixer Gate Monitoring
Automixer gate monitoring allows the user to track when an automixer gate opens or
closes. This feature can be enabled by checking the
Monitor Gate
checkbox in an
Automix
,
7
on the previous page). When automixer gate monitoring is enabled
for a channel, an unsolicited message is sent when the gate has opened or closed. The
response will include the Automixer OID, gate open or closed status, and the signal level
immediately after the status has changed (see
for SIS response syntax).
Comparing the automixer gate threshold setting to the gate status in the response will
indicate whether the automixer gate has opened or closed. When the gate status in the
response is
1024
or greater, the gate has opened, and when the gate status in the response
is less than
1024
, the gate has closed.
Input Pre-Mixer Gain Block
Double-click the pre-mixer
Gain
block to open the
Pre-mixer Gain
dialog box.
Figure 62.
Input Pre-mixer Gain Block
The
Pre-mixer Gain
dialog box provides controls to boost, attenuate, and mute the signal
after input processing occurs and before it is sent to the mix matrix.
Figure 63.
Input Pre-mixer Gain Dialog Box
Input Name
—
This name changes to match the default or user defined input name.
figure 35. Input Pre-mixer Gain Block
1
Input Name
2
3
4
5
6
7
figure 36. Input Pre-Mixer Gain Dialog Box
