XMP 240 C AT • DSP Configurator Software
51
Outputs
There are 48 AT and Expansion outputs are available in the
Outputs
panel. Signals routed to
these outputs can also be transmitted onto the Dante network.
Figure 76.
Outputs Panel
Naming an Output
1.
Click the output name field.
Figure 77.
Output Name Field
2.
Delete the text and type the desired output name.
Figure 78.
New Output Name
3.
Press the <
Enter
> key or navigate away from the field to confirm and apply the new
output name. Press the <
Down Arrow
> key to navigate to and highlight the next name
field.
Figure 79.
Renamed Output
NOTE:
Follow the same procedure to edit an Output name.
Output Building Blocks
Extron building blocks are a quick configuration tool that can significantly reduce
configuration time. A building block is a collection of processor and gain settings for an
input or output processing chain. These building blocks have been built by Extron based on
extensive use and testing with each intended application or specific device.
Figure 80.
Accessing Building Blocks on an Output
figure 46. Output Name Field
figure 47. New Output Name
figure 48. Renamed Output
figure 49. Accessing Building Blocks on an Output
