Extron electronics XMP 240 C AT, Руководство пользователя, Страница: 94 / 139

XMP 240 C AT • Dante Controller 99
Creating Subscriptions Between Transmitters and Receivers
1. Ensure the control computer and XMP 240 C AT are connected to the same network.
2. From the start menu select:
All Programs > Audinate > Dante Controller > Dante Controller
The Dante Controller - Network View screen opens.
Dante Controller auto-discovers Dante devices on the network and advertises itself to
allow other Dante-enabled devices to communicate with it. Transmitters connect to
receivers using the subscription matrix.
Figure 134. Routing Tab of Network View Screen
3. To show the transmitters of a Dante device, click the
+
box next to the desired device
in the
Dante Transmitters
panel, such as
AXI22D-ConfRm1
(see figure 134,
1
). The
+
changes to a
–
sign when the device expands.
4. To show the receivers of a Dante device, click the
+
box next to the desired device in
the
Dante Receivers
panel, such as
XMP240CAT-MainRack
(
2
).
5. Click the intersection of the desired subscription between a transmitter and a
receiver (
3
).
Example : The mic/line input transmitters of the
AXI22D-ConfRm1
and
AXI22D-ConfRm2
are routed to the AT input receivers of the
XMP240CAT-MainRack
.
A check mark at the intersection indicates the subscription is made. A check mark also
appears next to the receiver channel.
NOTE: A receiver can subscribe to only one transmitter. A transmitter can subscribe
to multiple receivers.
80 Routing Tab of Network View Screen