XMP 240 C AT • Configuration Tools
83
Restore Default Building Blocks Button
on the previous page) If
default building blocks that come installed with DSP Configurator are deleted, click the
button to restore them.
NOTE:
Only the default building blocks can be restored with this function. User
created building blocks are not restored if deleted.
TIP:
To avoid accidentally deleting user created building block files, once they are
created, export them to a safe location on the disk. This creates a backup copy of
the building block file, should it be deleted by the user by mistake.
New Folder Button
— Click the
button to create a new folder that building blocks
can be dragged into. Upon creation, a default folder name is highlighted and a custom
name can be entered. Click a folder name twice to edit the folder name.
Building Blocks Panel
— This panel contains folders and building blocks. Click and
drag building blocks to change their order or place them inside folders. Click a building
block name twice to edit the building block name. Click a folder name twice to edit the
name of the folder.
Device Settings
The
Device Settings
dialog box provides access to general settings of the XMP 240 C AT.
Select
Tools > Device Settings
to open the
Device Settings
dialog box. Device settings
are only available when connected live to a device.
Within the
Device Settings
dialog box, the following tabs are available:
•
Unit Info
•
•
•
•
•
Unit Info
The
Unit Info
tab displays the unit name, firmware version, device model, device part
number, and device MAC address. Click in the
Unit Name
field to rename the device within
the listed naming parameters. Click
Apply
to save the changes.
Figure 113.
Unit Info Tab
