Extron electronics TLI Pro 201, Руководство пользователя

Страница: 17 / 46

Securing the HDMI Connector
Use a HDMI cable to connect the HDMI input or output to the HDMI ports on the front
panel of the interface (
figure 2 ,
A
or
B
, on page 5).
Use the provided LockIt HDMI lacing bracket to secure the HDMI connector:
1.
Plug the HDMI cable into the panel connection.
2.
Loosen the HDMI connection mounting screw from the panel enough to allow the
LockIt lacing bracket to be placed over it. The screw does not have to be removed.
3.
Place the LockIt lacing bracket on the screw and against the HDMI connector, then
tighten the screw to secure the bracket.
ATTENTION:
•
Do not overtighten the HDMI connection mounting screw. The shield it
fastens to is very thin and can easily be stripped.
•
Ne serrez pas trop la vis de montage du connecteur HDMI. Le blindage
auquel elle est attachée est très fin et peut facilement être dénudé.
3
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
Figure 4.
Securing the HDMI Connector
4.
Loosely place the included tie wrap around the HDMI connector and the LockIt lacing
bracket as shown.
5.
While holding the connector securely against the lacing bracket, tighten the tie wrap,
then remove any excess length.
TLI Pro 201 • Panel Features 9