Extron electronics TLI Pro 201, Руководство пользователя

Страница: 22 / 46

Output
Sets the display Resolution , Sleep Timer , and Display Timer and enables Test
Patterns to be shown.
Touchpanel Setup
EXIT
STATUS
NETWORK
OUTPUT
INPUT
AUDIO
PROJECT INFORMATION
ADVANCED
Output
Resolution
Current Output
Set Display
Display Native
1080p at 30Hz
3840x2160 at 30Hz
Project Resolution
More Resolutions
SET
SET
SHOW
Test Patterns SHOW
Sleep Timer
Minutes
5
Display Timer
Minutes
5
Figure 10.
Output Screen
Resolution
The
Resolution
panel shows the current resolution of the interface output signal and
offers three main options for setting the resolution of the TouchPanel display.
•
Click Display Native to set the resolution of the interface output to the native
resolution of the display device.
•
Click Project Resolution to use an imported GUI Designer project to set the
resolution of the TLI Pro 201.
•
Click
Set Display
to open the
TLI Output Resolution and Refresh Rate
dialog
box (see figure 11)
TLI Output Resolution and Refresh Rate
Refresh Rate
60
23.98
24
25
29.97
30
50
59.94
Resolution
3840x2160
1920x540
1920x720
3440x1440
3840x1080
4096x2160
C1: 1080p
C2: 1080p
C3: 1080p
CANCEL
SAVE
USE EDID
SHOW ALL
Resolution List:
Figure 11. TLI Pro 201 Output Resolution and Refresh Rate
When the panel opens, by default, USE EDID is selected. The resolutions for which
EDID files are available are listed on the left. When a resolution is selected, the list of
refresh rates available for that resolution can be seen on the right.
Click
SHOW ALL in the
More Resolutions
panel to display all resolutions and all
refresh rates supported by the interface (for a complete list, see Output Screen
Resolutions on page 6).
TLI Pro 201 • On-screen Menus 14