Extron electronics TLI Pro 201, Руководство пользователя

Страница: 42 / 46

Reset All IP Settings
Purpose and Notes
Reset All IP Settings mode enables you to reset IP settings to factory defaults.
Activation
To reset all IP settings:
1.
Hold down the reset button for about 6 seconds until the Power LED blinks twice
(once at 3 seconds and again at 6 seconds).
2.
Release and press reset momentarily (for <1 second) within 1 second. Nothing
happens if the momentary press does not occur within 1 second.
Result
Reset All IP Settings mode:
•
Sets the DHCP back to factory default (
Off
)
•
Sets the Hostname back to factory default (<
Model name
>-<
last 3 octets of MAC
>:
TLI-Pro-201- AB-CD-EF
)
•
Sets the IP address back to factory default ( 192.168.254.251 )
•
Sets the Subnet Mask address back to factory default (
255.255.255.0
)
•
Sets the Gateway address back to the factory default (
0.0.0.0
)
•
Sets the DNS Primary address back to the factory default ( 127.0.0.1 )
•
Sets the Domain name back to factory default (Blank)
Reset to Factory Defaults
Purpose and Notes
Reset to Factory Defaults mode is useful if you want to start over with configuration
and uploading.
Activation
To reset the unit to all factory default settings:
1.
Hold down the reset button for about 9 seconds until the Power LED blinks three
times (once at 3 seconds, again at 6 seconds, and again at 9 seconds).
2.
Release and press reset momentarily (for <1 second) within 1 second. Nothing
happens if the momentary press does not occur within 1 second.
Result
Reset to Factory Defaults
mode performs a complete reset to factory defaults (except
the firmware).
•
Does everything Reset All IP Settings mode does.
•
Removes TLI Pro 201 user interface layout and configurations
•
Reset all TLI Pro 201 settings to factory default
•
Resets passwords
NOTES:
•
The factory configured passwords for all accounts on this device have
been set to the device serial number. Passwords can be changed during
configuration. They are case sensitive.
•
If the device is reset to default settings, the passwords are reset to the
default password, which is
extron
(for either
admin
or
user
).
TLI Pro 201 • Reference Material 34