Extron electronics TLI Pro 101, Руководство пользователя

Страница: 20 / 41

On-screen Menus
On-screen menus allow initial configuration of the TLI Pro 101.
•
Setup Menu
•
Calibration Screen
Setup Menu
To access the setup menus, press the recessed front-panel
Menu
button (see figure 6 ,
B
, on
page 12).
The menu opens at the Status screen. There are six different screens (
Status , Network ,
Output , Audio , Input , and Advanced ) that can be selected by pressing the appropriate
button in the navigation panel at the top of the screen.
There is also a red
Exit
button in the top right corner of the screen. Pressing this button
applies and saves any changes and closes the menu screens.
Status
Info
Model: TLI Pro 101
Part Number: 60-1083-01
Firmware
Version: 1.00
PoE Status: On
Network
IP Address:
DHCP:
Host Name:
Off
192.168.254.251
TLI-AB-CD-EF
Output
Resolution:
Project:
Sleep Timer: 800x600
N/A
5 Minutes
Audio
Master Volume:
Master Mute:
Off
99
Input
HDMI Port: No Signal
Status Output Audio Advanced Exit
Network
Input
Advanced
Controller IP: N/A
Project Size: N/A
Figure 7.
Status Screen
This is a read-only screen. The
Info
panel provides basic information about the TLI Pro 101.
Each of the other five panels shows a summary of the information on the other screens.
Pressing any of the panels opens the corresponding screen in exactly the same way as
pressing the buttons in the top navigation panel.
The bubble in the
Network panel lights green when there is a network connection or amber
if there is no connection. The bubble in the
Advanced
panel lights green when a control
processor is connected or amber if none is connected.
TLI Pro 101 • On-screen Menus 13